Standard Features

• The first channel of each pack is addressable via rotary switches, channels two and three default to the next two addresses, or can be assigned to control by the first channel. Two RJ-45 Connectors for DMX-512a Console input/ output/feed through. DMX signals will pass through an unpowered unit.
• Master/Slave Option: When addressed to 0, Channel levels are controlled by the onboard potentiometers. Slave packs may be daisy-chained from both RJ45 ports.
• 5 Built-in Programs for Testing and Demonstration.

Universal 12-24 vdc Self-powered Operation

• The Dimmer Pack will operate on ANY DC voltage from 12 to 24 vdc. It derives its power from the external DC supply, so no AC plug-in is required. See TPR LED Power Supplies brochure for appropriate 12vdc supplies, or if other voltages are required, any UL listed supply may be used. (ETL Logo file #3168550)
• Polarity Protected: The WESTPOWER 300 will not be damaged by a Reversed Polarity connection.
• A Red LED on the circuit board will light to indicate improper connection, and the unit will not operate.
• A Green LED indicates correct polarity. Connection to higher DC or AC voltage may cause damage to the unit and voids the warranty.

10 Amps / Output Channel (25 Amp max/pack), Fuse Protected

• Input and Output connections are made using captive screw terminals.
• 120 watts/Output Channel, (maximum 300 watts/pack) at 12 volts dc
• 240 watts/Output Channel, (maximum 600 watts/pack) at 24 volts dc
• Dim/Non-Dim: Any Output(s) may be assigned to On/Off (Non-Dim) Mode Liquid Tungsten© Brightness Slewing
• Liquid Tungsten is an onboard software package that smoothes out the DMX steps and makes an LED act as if it were a quartz lamp. Dimensions & Mounting
• 7.5"h x 8.5"w x 2"d; Steel Enclosure, Standard Black Powdercoat Finish; approx 3 lbs
• 1/2" knockouts: (4) on bottom, (1) on top
• (4) #6 Keyholes on back of unit to left and right of circuit board.
• Suitable for interior mounting. For Exterior/Wet or Damp locations the Dimmer Pack must be mounted in a water resistant enclosure.
• Operating: -20 to 122F/-28 to 50C; 5-95% non-condensing humidity.
• Custom Enclosures can be Factory configured to suit individual projects. Consult factory or your representative. Warranty
• Limited 12 month warranty when installed per manufacturer's instructions. Full terms on request

Instruction Manual (PDF)